ELISA WASHWELL PLATE ANALYZER

ELISA WASHWELL PLATE ANALYZER 

•  Specially designed Manifold assembly to prevent any scratching on bottom of well.
•  User programmable soak time, wash cycles and dispensing volume.
• On Board two plate incubator at 370C with programmable timer.
•  Waste bottle full warning with audible alarm.
•  Built-in stabilizer.
•  Continuous aspiration to prevent overflow.
•  Removable manifold.
•  Ability to wash single strip of 8 wells.
•  Auto detection of bottom of well and collision prevention.
•  Washwell PLATE

•  Manifold : 8 Way Manifold Dispensing.
•  Method : Specially designed Peristaltic Pump.
•  Volume : 300 to 400 ml in steps of 50 ml Aspirating.
•  Method : Continuous through diaphragm pump while Dispensing hence preventing overflow.
•  Residual Volume : < 5 ml.
•  Waste Bottle : One (Capacity 2 litres) with audible alarm when bottle is completely filled in with waste solution.
•  Wash Bottle : One (Capacity 2 litres).
•  Rinse Bottle : One (Capacity 2 litres).
•  Display : Single line Backlit LCD with 16 characters
•  Liquid contact materials : Silicon, Stainless steel, derline.
•  Memory : 8 KB Non volatile RAM battery back up supporting 35 open Channels.
•  Washing Method : Longwash, Shortwash Rinsing, Priming.
•  Incubator : For Two ELISA Plates, 37º C.
•  Timer : Individually Programmable.

•  Wattage : 50 Watts.
•  Voltage : 115 - 230 Volts ± 10%, 50 /60 Hz.
•  Operating Position : On horizontal, rigid, flat and vibration free surface, Operating Conditions.
•  Temperature : + 18º C to 35º C.
•  Humidity : up to 85 %.
•  Storage Conditions.
•  Temperature : - 10º C to 60º C.
•  Humidity : up to 85 %.
•  Enclosure : ABS Fire retardant.